Reeves Sleeve Rescue Stretcher in Orange

Six padded carry handles allow personnel to transport the patient with ease. For additional support, the Reeves 122 Sleeve includes removable Velcro head securing blocks, adjustable head and chin securing straps, a chest and arm securing flap with Velcro, a leg securing flap with Velcro and a spine board compartment for added strength and rigidity. Six chest and leg straps with buckles and a yellow "fail-safe" strap are added for additional security.

This is a simple system that gives you the complete patient handling system. The Reeves Sleeve is made from 510g vinyl laminated nylon which gives it extreme strength. The sleeve is built up on three layers of laminated nylon and all the straps are one continuous length, stitched the full width of the sleeve into the three layers, giving total strength. The material can resist acids, stains and if dirtied, can be easily decontaminated. The unit sleeve weighs under 7kg and folds into a 60cm x 30cm x 12.5cm roll but opens up into a 197cm x 60cm stretcher. Using this Sleeve you can turn any Spine board into a Rescue Stretcher at a fraction of the cost.

The Reeves Sleeve is designed to take any Spineboard, Scoop Stretcher, Bi-fold metal backboard or any narrow sturdy makeshift device and turn it into a complete Rescue Stretcher. The board slides inside the Sleeve and is secured using the buckles provided. The patient can then be secured into the stretcher using the straps which are integrated into the Sleeve. Even the head immobiliser is integrated into the unit. Once the patient is secured, you have a fully functioning Rescue Stretcher with the features of a spine board. The Stretcher can be lifted horizontally using a four person lift, a helicopter lift using the seamless rings on each corner or a vertical lift using the lifting harness provided.

The Reeves Sleeve does not have to be used with a spineboard. On its own it is a fully functioning rescue stretcher but without the restrictions of rigidity. The patient can be put in the stretcher and once secured, can be dragged, lifted or pulled through confined areas with minimal effort. The stretcher will protect the casualty and ensure tight corners can be negotiated with little effort.

  • The Reeves sleeve can be combined together with an existing spineboard to create a new cost-effective confined space immobilisation tool
  • Conforms with OSHA standards dealing with emergency rescue equipment in confined space and construction
  • Designed for rapid patient immobilisation in spinal and neck injuries
  • Constructed of 0.5kg vinyl laminated nylon
  • Resists acids and stains, easily decontaminated
  • Suitable for vertical & horizontal lift extrication
  • Helicopter hoist capability
  • Lightweight compact design - 6kg
  • Assists in spinal immobilisation with patient comfort and safety
  • Load capacity of 682kg with spineboard
  • The patented Reeves© sleeve is complete patient packaging in an easy to store format
  • Dimensions: 
    • Open: 197cm x 60cm
    • Folded: 60cm L x 30cm W x 12.5cm H 
    • Weight: (with Reeves Spine Board) 27 lbs; (without Reeves Spine Board) 15 lbs 
    • Colors: Orange
  • Payments secured by
  • Barclaycard Logo Created with Sketch.
  • Mastercard Logo Created with Sketch.
  • Visa Logo Created with Sketch.
  • PayPal Logo Created with Sketch.